Are you comparing the efficiency ratings of new air conditioning and furnace systems? Perhaps you want to check the rating on your existing HVAC equipment. Either way, you can find the efficiency rating and projected annual operating costs by checking the yellow Energy Guide label on the side of the unit. Here’s more information about the different ratings you might see and what they mean.
SEER stands for Seasonal Energy Efficiency Ratio, a way of measuring air conditioning efficiency. The SEER rating represents the cooling output of an AC unit over an entire cooling season, divided by the amount of energy consumed during that period. A higher SEER rating indicates better energy efficiency and lower energy bills.
Today, the minimum SEER rating for new air conditioners is 14 SEER in the northern U.S. and 15 SEER in the southern U.S. This is an increase from the previous minimum requirement of 13 SEER in the north and 14 SEER in the south, which was in effect from 2015 to 2022. This change demonstrates the U.S. Department of Energy’s (DOE) persistent efforts to reduce energy consumption and greenhouse gas emissions.
These days, high-end air conditioners boast ratings of 26 SEER or higher, delivering amazing energy savings. However, outstanding SEER ratings usually come with a higher up-front cost. This means you should consider both the initial investment and the potential for long-term savings when choosing a new air conditioner.
While SEER ratings get more attention, there’s a different efficiency metric you should know about. It’s called EER, and it stands for Energy Efficiency Ratio. This conveys the performance of an air conditioner under specific operating conditions. The EER rating helps you understand whether the system will keep up with demand on extreme summer days.
Currently, only the southwest region has a minimum EER rating of 12.2 EER for residential central air conditioners. Peak ratings top out at about 14 EER. Consider that SEER and EER typically correspond, with higher ratings indicating greater overall performance.
Heating Seasonal Performance Factor (HSPF) ratings are measurements of the energy efficiency of air-source heat pumps when in heating mode. HSPF is a percentage of the total heat output in British Thermal Units (BTUs) over the heating season to the amount of electricity used in watt-hours. A higher HSPF rating indicates a more efficient heat pump.
The minimum HSPF rating for new heat pumps is 8.8 HSPF, an increase from the previous minimum of 8.2 HSPF. By requiring higher minimum HSPF ratings, the DOE hopes to encourage the use of more energy-efficient heating systems in homes and businesses throughout the U.S. You can always settle for the minimum, but you may want to consider a high-end heat pump with a rating of 13 HSPF or higher for the best performance.
Annual Fuel Utilization Efficiency (AFUE) ratings are another measure of heating system efficiency, but they apply to furnaces and boilers. AFUE is a percentage of the annual heat output to the energy consumed during that period. The higher the AFUE rating, the more efficient the heating system.
In 2023, the minimum AFUE rating for new gas furnaces was revised to 81. Previously, the south and southwest had a minimum of 80 AFUE, and the north required ratings of 90 AFUE or higher. While you aren’t required to install anything above the minimum, you’ll save on your heating bills by choosing a furnace rated 95 AFUE or higher.
The Environmental Protection Agency (EPA) launched the ENERGY STAR program in 1992 to help homeowners and businesses identify the most energy-efficient products available. HVAC equipment, appliances, water heaters, light fixtures, office equipment, electronics and building products that meet or exceed specific criteria can earn ENERGY STAR certification.
ENERGY STAR-rated products go far beyond the minimum requirements to save energy and reduce emissions without sacrificing performance or features. You can also look for the ENERGY STAR Most Efficient designation, which identifies the best performers in energy efficiency and innovation. The EPA is actually overhauling the qualification requirements in the wake of the new minimum HVAC efficiency standards.
For help deciding which HVAC energy-efficiency rating is right for your budget, turn to Service Experts Heating & Air Conditioning. We can assess your situation and help you make an informed decision. Rest assured that we offer a range of products from today’s top brands, all of which meet or exceed the minimum efficiency requirements for 2023. We’re so confident you’ll be happy with our services that we offer a 100% satisfaction guarantee! For more information or to schedule a no-cost HVAC installation estimate, please contact a Service Experts office near you.
Student loan debt in the United States has been a growing concern for many years. Today’s total student debt soars over $1.7 trillion, with the average college graduate owing $20,000 to $25,000. If you’re contemplating your educational journey or counseling someone who is, it’s important to... Continue reading
By Brian Sodoma, for Service Experts With autumn on the horizon, homeowners will soon be preparing for the winter months ahead. Cold weather adds additional demand on your HVAC system. To prepare your heating unit for the heavy work it will be doing, scheduled HVAC maintenance should be on your... Continue reading
The HVAC industry is in a constant state of change. With technological breakthroughs and ever-important environmental concerns, the skills demanded of HVAC professionals are evolving faster than ever. Preparing to adapt and satisfy these new challenges is essential for anyone hoping to join the... Continue reading
© 2023 Service Experts, Service Experts Heating & Air Conditioning, and the Service Experts logo and design are registered trademarks of Service Experts LLC and used under license by SE Canada Inc. All Rights Reserved. *Not applicable to the Advantage Program. See your signed Advantage Program Agreement for full details and exclusions. 100% Satisfaction Guarantee is subject to certain restrictions and limitations as set forth in the applicable Terms and Conditions.